Environmental-friendly waste tyre & plastic processing equipment

Waste tyre & plastic fuel oil equipment 1. Lower investment 2. Higher oil output 3. Environmental protection 4. ISO 9001

 Main information of waste tyre & plastic fuel oil equipment

1. The main parts of equipment

1.1. Rotary pyrolysis device

1.2. Automatic security environmental protection slagging system

1.3. Oil steam cyclone dust removal device

1.4. Quick condensing system

1.5. Waste gas purifying and reclaim burning system

1.6. Heat source supply system

1.7. Heat source environmental protection system

1.8. Central electronic control system

2. Technological Process

Crush waste tires and send them to rotary processor with negative pressure to catalyze and heat in order to get oil steam; oil steam shall pass light and heavy oil steam separator; light oil steam shall enter into the condenser and meanwhile residues shall be discharged automatically in succession. the liquefied part shall be condensed to rubber oil; and the part that cannot be liquefied shall be input into heating supply system for burning by way of combustion gas purification system.

3. Technical parameter of equipment 

Item	Content
Model Pyrolysis plant	HT-1 Batch type	HT-2 Batch type	HT-5 Batch type
Raw material	Waste rubber Waste plastic	Waste rubber Waste plastic	Waste rubber Waste plastic
Structure	Horizontal rotation	Horizontal rotation	Horizontal rotation
Handling capacity/per batch	5 tons	8 tons	10 tons
Oil yield rate	Tire: 45% Plastic: from 33% to 85% Waste oil: 85%	Tire: 45% Plastic: from 33% to 85% Waste oil: 85%	Tire: 45% Plastic: from 33%  to 85% Waste oil: 85%
Working pressure	Negative pressure	Negative pressure	Negative pressure
Rotary speed	0.4turn/m	0.4turn/m	0.4turn/m
Total power	3.0KW	3.0KW	5.5KW
Cooling mode	Water cooling	Water cooling	Water cooling
Rotary mode	Internal gears	Internal gears	Internal gears
Heating mode	Hot wind	Hot wind	Hot wind
Installation	Have base	Have base	Have base
Noise DB	≤85	≤85	≤85
Reactor dimension	2.2m*5.1m	2.2m*6.6m	2.8m*6.6m
Weight	26tons	28tons	30tons
Production time	20 days	20 days	20 days
Space required	About 300 m2	300-400 m2	300-400 m2
Process time  per batch	12-14hs	12-14hs	12-14hs
Working mode	intermittent	intermittent	intermittent
Consumption of water Per batch	Little	Little	Little
Warranty period	1 year	1 year	1 year
After-sales service	Lifetime	Lifetime	Lifetime

4.  Environmental Protection

Treatment of the three wastes in the course of production.

1. Exhaust gas

By means of the two safety devices: water seal and gas nozzle , to eliminate pollution , which can saves a lot of fuel; for Soot emissions ,use water spraying desulfurization filter, which can remove the sulfur and meet the GB13271-2001 boiler air pollutants emission standard.

2. Waste liquid

Faintly acidic waste water shall be produced in the course of treatment of oil products (about 50 kg/ton oil, small volume and tractable); after neutralization by adding faintly alkaline liquid, the neutral waste water shall be harmless with three-grade filtration and be discharged into special evaporation processor to vapor (heat source is the flue residual heat of main processor).

3. Waste solid

The residue left after pyrolysis of waste tires is carbon black; there is no waste solid left

Environmental-friendly waste tyre & plastic processing equipment